Fast Heat's MoldXChecker®  Hot Runner Mold Testing System. 

MoldXChecker®
List Price:  $2,100 Includes Shipping

The MoldXChecker® hot runner mold testing system prevents line-down situations by quickly identifying shorts, opens, and resistance values in heaters and thermocouples. Invented by a maintenance professional for maintenance professionals!


  • Be Safe! - Check for dangerous and destructive shorts BEFORE plugging your tool into a controller, both on the production floor and in the tool room.
  • Save Maintenance Time! - The old way checking for shorts and measuring ohms for each zone takes forever.
  • Ensure 100% Accurate Testing! - No more skipping steps, getting false readings or searching for shorts.
arrow_drop_down_circle
Divider Text
 Maintenance Routines
  1. Check for dangerous and destructive heater shorts.
  2. Identify open heaters and thermocouples.
  3. Measure ohms for predicting heater failure and verifying thermocouple continuity.
Maintenance the "Old Way"
  1. Most people don't check for shorts! But, if you do, you would have to put one lead of the multimeter to ground and precisely touch each pin in the connector with the other lead.
  2. To identify opens, you would have to check continuity one zone at a time and would have to know the wiring diagram.
  3. To measure ohms, you would have to read one zone at a time and would also have to know the wiring diagram.
Now With MoldXChecker®
  1. Simply turn the dial to the center position. If there is a short, the MoldXChecker® will show you which zone is shorted.
  2. If a heater or thermocouple is open, the MoldXChecker® will read "|" in the digital display.
  3. Simply rotate the dial through each zone for accurate ohm readings. 

As used by MoldTrax for hot runner repair training.

arrow_drop_down_circle
Divider Text

Why the MoldXChecker®?

Early diagnosis is the best insurance against downtime. Use the MoldXChecker® to detect opens, shorts and overall mold heater health to prevent major damage and downtime -- and avoid related expenses.

  • Opens:  Shows thermocouple or heater opens, indicates damage to the mold or a misplaced wire.
  • Shorts:  Electrical shorts are destructive to your controller and hot half, causing critical failures.
  • Heater Health:  Test the Ohms in the drops, manifolds, and sprues to ensure heaters and thermocouples are properly operating. 

Don't know the wiring diagram for your tool? No problem. The MoldXChecker® is configured to your wiring specifications so your team simply needs to plug in the controller side of the cables.

arrow_drop_down_circle
Divider Text
Order MoldXChecker Now

Please allow for 4 weeks shipping, if needed sooner, advise below. 

Loading...
Step 1: Account Information
arrow_drop_down_circle
Divider Text
settings
settings
settings
settings
Please specify what type of connect in the box below.

Price shown applies to all industry standard connections (i.e. DME standard). If you require highly customized connections, please place your order now and we will contact to discuss your order. Note, additional charges may apply for certain custom connections.

settings
settings
Please allow for 4 weeks shipping.  If needed sooner, please advise below.
settings
Step 2: Billing Details
arrow_drop_down_circle
Divider Text
settings
settings
settings
settings
settings
settings
Step 3: Payment Information
arrow_drop_down_circle
Divider Text
settings
settings
settings
settings
settings
settings
SUBMIT ORDER
By submitting this form, you agree to our Terms of Use and Privacy Policy.
security
lock
verified_user
arrow_drop_down_circle
Divider Text
Related Products
arrow_drop_down_circle
Divider Text

Copyright 2019 Fast Heat, Inc.

[bot_catcher]